Adding Addresses And Bar Codes

Addresses and bar codes can be added to mailing address labels only.

• Click the Label tab at the top of the Label Editor window.

• Drag a field from the List of Fields to the label area to the right.

• For Bar Code, change its font to "bars12" and change its size to 12 points.

  To print bar codes to United States Postal Service specifications, you must use this font and size with a plain text style. See Setting Text Fonts and Setting Text Size in this section.

• Resize the dragged object as necessary.

  Objects should be made as long as possible to make sure their text is not cut off. In addition, Name and Address objects should be expanded to allow at least 4 lines. See Resizing Objects in this section.

• Move the object to the desired location on the label, if necessary.

  Make sure it appears within the defined label area. See Moving Objects in this section.